Pedal Assist Level:
The display unit is integrated with the
control pad to provide several levels of
power. Press the or button to
increase or decrease the power and
speed levels.
When the display is powered ON the
default is PAS level 0.
Note: Increasing your PAS level
provides more power and speed.
FUNCTIONAL OVERVIEW
FUNCTIONAL OVERVIEW
On/off:
To turn the unit on, press and hold the
power button to start the display.
Press and hold the power button
again to switch it off.
Note: The battery must also be turned
on (if applicable)
If the password function of the display
is activated, you will need to input the
correct password to enter the normal
user display interface.
Display Information:
Press the button to cycle through
the current information data available
on the main menu of the display. The
information is displayed on the bottom
of the screen and includes the
single-trip distance (TRIP), total
distance (ODO), maximum speed
(MAX), average speed (AVG), and
riding time (TIME).
Backlight Display:
Press and hold the light button for
a few seconds to dim the display
backlight of the device. This will
change the backlight to a darker
setting for night riding.
Press and hold the light button
again to turn off this feature and
return to the default backlight setting.
If a front light is installed, this will also
power the light.
1
2
3
5
7
DPC18 MANUAL© Copyright Ebike Essentials. All Rights Reserved.
www.Bafangusadirect.com
Press and hold the button to activate
walking assist mode. The walking icon
will be displayed on the screen and the
motor will move the bicycle at about 4mph.
You need to keep holding down the
button until you are done wanting to use
the walk assist.
To turn off the walk assist, let go of the
button.
The function is designed for walking
alongside the bicycle only. Please do not
use this function when riding.
3
Walk Assist Mode:
To Next Page
Loading...
