Preparation:
Please make sure the device is turned on
To Enter Settings
Scroll to the “Information” option on the user
setting interface and press the button to
enter the information settings page. This will
display the following:
ERROR CODES
INFORMATION SETTING
DPC18 display can show e-bike faults. When a fault is detected, the icon will be displayed. One of the
following error codes will be displayed.
1. Battery Information: This information is
currently unavailable on the Mid-drive models
2. Error Code Information: This information
provides a list of previous error codes to assist
with diagnostics.
Note: These are not current error codes and
should not cause concern
ERROR CODE DEFINTION
Error code Error definition
Throttle fault
Low voltage cut-off protection
High voltage cut-off protection
Hall sensor fault
Max temperature protection cut-off
Controller fault
Speed sensor fault
Battery communication fault
Communication fault
04/05
06
07
08
10/11
12
21
22
30
12
DPC18 MANUAL © Copyright Ebike Essentials. All Rights Reserved.
www.Bafangusadirect.com
To Previous Page
Loading...
