Bailey Retreat Willow - Setting Multiple Cooking Phases; Enquiry Mode; Defrost by Time; Defrost by Weight

3-45
Leisure Home Equipment
3
3.12.16 Enquiry mode
● Whilst the microwave is in use, the LED display (A) will countdown the cooking time that you have
set.
● To check the power level that the microwave is cooking at, press the microwave button (D) and the
power level will appear on the LED display (A) for a few seconds.
● To check the time of day, press the Clock/Pre-set button (J) and the time of day will flash on the
LED display (A) for a few seconds.
3.12.17 Defrost by time
● Press the defrost by time button (B) and the LED display (A) will show “dEF2”.
● Turn the adjustment dial (G) to set the defrost time that you require.
● Press the Quick Start/Start button (C) and your microwave will start to defrost the food.
3.12.18 Defrost by weight
● Press the defrost by weight button (K) and the LED display (A) will show “dEF1”.
● Turn the adjustment dial (G) to select the weight of the food that you want to defrost. The letter “g”
will appear on the LED display (A) to indicate grams.
● The microwave will automatically calculate the defrost time, based on the weight that you have
selected.
● Press the Quick Start/Start button (C) and your microwave will start to defrost the food.
3.12.19 Setting multiple cooking phases
● It is possible to set the microwave to cook at different power levels within a single cooking time. A
maximum number of 3 cooking phases can be set at once.
● Press the microwave button (D) and set the power level for the first cooking phase, using the
adjustment dial (G).
● Once the power level that you require for the first phase appears on the LED display (A), press the
microwave button (D) again.
● Turn the adjustment dial (G) to set the cooking time for the first cooking phase.
● Press the microwave button (D) and then follow the same procedure for the second cooking phase
and third cooking phase (if required).
● Press the Quick Start/Start button (C) and the microwave will proceed with the cooking phases
that you have set.
● If you have set the incorrect power level or time, press the Cancel/Stop button (E) and the LED
display (A) will return to showing the time of day.
● At the end of the cooking time, your microwave will give an audible signal and the LED display (A)
will return to showing the time of day.