4-9
General
4
4.3.2 Side Dinette bed – Assembling the Bunk
Step 3 Kneel on supplementary bed cusion as shown and pull brown tag firmly.
The bunk will then move into position in one movement.
Step 4 Once the bunk is in position unfold it and insert the infil cushion.
Step 1 Remove long base cushion to allow you to pull
out the the bunk bed.
Step 2 Angle the bunk at 45 degrees.
Step 5 The side dinette bunk and
double are now ready to use
(please note bedding set is
available as a cost option).
To Next Page
Loading...
