Bailey Retreat Willow - Front Lounge Bed Assembly

4-10
4
General
4.3.3 Front Lounge Bed assembly
Step 1 Remove all scatter cushions and gather bed
frame components and supplementary bed cushion.
Step 2 Place the two long frame sections approximately
30cm apart. Then slot the smaller transverse section
into place to make a sturdy base.
Step 3 Open the folding top and position it on the frame
securely using the location lugs on the base.
Step 4 Place the finished base in postion.
Step 5 Place the supplementary bed cushion onto base
as shown.
Step 6 The front double is now ready to use (please
note bedding set is available as a cost option).