Bajaj Pulsar 150 User Manual

Dealer Development Center, Pune
28
Pulsar DTS-i 150/180 Training Notes Dealer Development Center, Pune
29
Pulsar DTS-i 150/180 Training Notes
• Importance Points to Remember
During Engine Overhauling**
• Removal of Engine from Frame**
• Dismantling of Engine**
• Dismantling Engine Sub Assembly**
• Part Inspection Parameters**
• Assembling Engine**
• Service Data
• Tightening Torque
• CAT Converter
• Controlled Lubrication System
Engine &
Transmission
**All these topics are similar with Pulsar DTS-i
180cc Training Note. For more details refer
Pulsar DTS-i 180cc Training Note
Notes

Bajaj Pulsar 150 Specifications

General

Displacement	149.5 cc
Max Power	14 PS @ 8500 rpm
Max Torque	13.25 Nm @ 6500 rpm
Transmission	5-speed constant mesh
Fuel Tank Capacity	15 liters
Brakes	Front: Disc, Rear: Drum
Wheelbase	1320 mm
Kerb Weight	144 kg
Compression Ratio	9.5:1
Fuel System	Carburetor
Clutch	Wet Multi Plate
Rear Suspension	Twin Shock Absorbers
Overall Length	2055 mm
Overall Width	765 mm
Overall Height	1060 mm
Ground Clearance	165 mm
Seat Height	790 mm
Ignition	Digital
Starting	Electric Start
Front Suspension	Telescopic, 31 mm Conventional fork
Front Tyre	80/100-17 Tubeless
Rear Tyre	100/90-17 Tubeless
Reserve Fuel Capacity	3.2 liters
Engine Type	4-stroke, 2-Valve, Twin Spark BSVI Compliant DTS-i Engine