EasyManuals Logo

Baker SG603A User Manual

Default Icon
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Document: 333D012G
5-18-2007
- 9 -
Specifications
Weight
The weight of the SterilGARD
®
III Model SG403A / SG603A cabinet is 564 / 775 pounds [2509 / 3447 N] with a
shipping weight of 684 / 920 pounds [3042 / 4092 N]. With channel stand, the cabinet weight is 640 / 858 pounds
[2847 / 3816 N] with a shipping weight of 760 / 1003 pounds [3380 / 4461 N].
Electrical Specifications
All electrical wiring should comply with the National Electrical Code and any applicable
Local Electrical Codes at the site of installation.
A single 115V AC, 20A, 60 Hz, Single Phase dedicated circuit is required to power this unit. This circuit shall
provide the protective earth ground for the cabinet.
The cabinet is internally protected with a 250V, 20A Circuit breaker.
Cabinet Ratings:
115V AC, 60Hz, Single Phase
Typical current less outlets for SG403A 8.0 Amps
Typical current less outlets for SG603A 12.0 Amps
The unit is furnished with one 14' power cord with 20-amp plug, type NEMA 5-20P.
The power cord is the Main Disconnect device for the unit. The unit should be positioned
in a manner that allows easy access to the power cord connection to the electrical utility.
The cabinet is provided with Fluorescent lighting.
The cabinet is provided with two GFCI protected, 115V AC, Duplex outlets. The outlet(s) on this circuit are
protected by a self-resetting circuit breaker. For the SG403A the breaker allows 5A total on all outlets. For the
SG603A the breaker allows 3A total on all outlets.
The cabinet may be provided with an optional lift that requires 115V AC at 2 Amps intermittent duty. The lift duty
cycle is 1 minute on, 9 minutes off.
The cabinet incorporates the Baker StediVOLT
®
blower motor speed control. This compensates for normal variations
in incoming line voltage.
The cabinet may be provided with an optional UV lamp. The UV lamp and Fluorescent lamp are interlocked to
prevent simultaneous operation.
The cabinet may be provided with an optional 24V DC power supply for low voltage options.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Baker SG603A and is the answer not in the manual?

Baker SG603A Specifications

General IconGeneral
BrandBaker
ModelSG603A
CategoryLaboratory Equipment
LanguageEnglish

Related product manuals