Document: 333D012G
5-18-2007
- 8 -
Motor / Blower assembly
The motor and blower are assembled on a slide plate. This allows the assembly to be easily removed from the
positive pressure plenum for faster servicing or replacement.
Cable ports (Optional)
A cable port is located in the cabinet’s left and right side walls. It provides a way of introducing power and data
cables, or siphoning tubes into the work area of the cabinet without having to go through the front viewscreen access
opening. A plug is provided for each port, when the port is not being used or the cabinet is being decontaminated.
To Next Page
Loading...
Need help?
General
