To Next PageTo Next Page
Need help?Do you have a question about the Balboa BP100UX and is the answer not in the manual?
General| Model | BP100UX |
|---|---|
| Type | Spa Control System |
| Blower | Optional |
| Ozone | Yes |
| Enclosure Rating | IPX5 |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Voltage | 120/240V |
| Heater | 1.0kW/4.0kW |
| Pump 1 | 1 or 2-speed |
| Pump 2 | 2-speed, 240V |
| Sensors | Temperature |
| Features | Freeze Protection |
Details customer, part numbers, and system models for the BP100UX.
Lists compatible control panels and their required software versions for full functionality.
Details part number revisions, dates, originators, and specific changes made to the system.
Explains Bluetooth (bba™ and bba™ 2) connection integration with control panels.
Details voltage, amperage, and wire configurations for system power connections.
Provides instructions and warnings for performing HiPot tests on the system.
Details voltage, speed, amperage, and timer settings for pumps, blower, ozone, and light.
Lists wattage and voltage specifications for the integrated heater.
Illustrates wiring connections for the integral heater version of the system.
Explains the function of DIP switches for system configuration.
Illustrates wiring connections for the remote heater version of the system.
Details how to configure the system with an optional expander board.
Maps setup numbers to component configurations for pumps, blower, and expanders.
Shows wiring details for optional expander boards and general connection guidelines.
Guides on changing software setups using spaTouch™ icon-driven panels.
Details how to change software setups using TP800/TP900/spaTouch™ menued panels.
Explains software setup changes for TP600/TP500/TP400/TP200 panels via Test Mode.
Provides detailed steps and indicators for selecting and confirming software setup changes.
Lists default control connections for relays in different setups, including fuse information.
Details functions of fixed DIP switches (A1-A6) for test mode, amperage rules, and memory reset.
Explains functions of assignable DIP switches (A4, A7) for heater cooldown and menu style.
Defines purpose and settings for jumpers J109, J30, J31, and J24 related to heater voltage and GFCI.
Warns about incorrect DIP switch or jumper settings and advises seeking help.
Lists part numbers for PCBAs, heaters, and temp sensor kits.
Provides part numbers, amperages, and locations for system fuses.
Configures pump, timer, circulation, cleanup, ozone, and purge settings.
Sets temperature display, conversion, and setpoint ranges.
Configures filter start times/durations and light cycle settings.
Sets up maintenance reminders and service intervals.
Configures amperage rules, modes, heater options, and menu style.
Maps TP900 button functions across setups and illustrates screen layouts.
Defines TP800 button functions across setups, excluding Setup 7.
Visual representation of the Spa screen buttons and their layout for the TP800 panel.
Visual representation of the Shortcuts screen buttons and their layout for the TP800 panel.
Maps TP600 button functions across setups 1-6, noting it's not supported in Setup 7.
Illustrates the physical layout and button numbering of the TP600 control panel.
Defines button functions for TP400T/TP200T panels across setups 1-7.
Maps button functions for TP400W/TP200W panels, supported in setups 5 & 6 only.
