Balboa TP400 - Continuous Filtration (24 Hour Filtration)

Revolution
Transforming the Control of Hot Tubs
56
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,
834 b2, Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Continuous Filtration (24 Hour Filtration)
To set continuous filtration, set Filter 1 to begin at a specified time (it could be
any time), and then to run for 24 hours.
In this case, the filter 2 start time only controls when the second purge happens.
Filter 2 end time will be unavailable.
Press LIGHT
repeatedly until
FILT1 appears
READY
R
ANGE
FLTR1
JETS
TS
J
J
AUX
U
X
A
LIGH
IGHT
G
T
H
HEAT
AT
A
JETS AU X LIGHT HEAT
READY
R
ANGE
FLTR
1
JETS
TS
S
J
AUX
U
X
LIG
LIGHT
H
HEAT
AT
JETS AUX LIGHT HEAT
At the main screen, begin by pressing TEMP.
When the temperature is still flashing, press LIGHT repeatedly until FLTR1
appears. (An extra press of LIGHT will take you to F2.)