www.baldormotion.com
6-12 Configuration MN1943
6.4.3 Commissioning Wizard
Each type of motor and drive combination has different performance characteristics. Before the
MotiFlex e100 can be used to control the motor accurately , the MotiFlex e100 must be ‘tuned’.
This is the process where the MotiFlex e100 powers the motor in a series of tests. By monitoring
the drive’s output and the feedback from the motor’s encoder, the MotiFlex e100 can make small
adjustments to the way it controls the motor. This information is stored in the MotiFlex e100 and
can be uploaded to a file if necessary.
The Commissioning Wizard provides a simple way to tune the MotiFlex e100 and create the
necessary configuration information for your drive/motor combination, so this is the first tool that
should be used. If necessary , any of the parameters set by the Commissioning Wizard can be
adjusted manually after commissioning is complete.
To Next Page
Loading...
