Need help?Do you have a question about the Baldwin Boxall VIGIL3 and is the answer not in the manual?
Personnel must read safety information regarding hazardous voltages and safe working practices before operating equipment.
This document provides an overview of a VIGIL3 EN54 Approved Voice Alarm System.
Lists key features of the VIGIL3 Voice Alarm System, including outputs, inputs, channels, and configuration.
Details the VIGIL3 Voice Alarm range, listing available modules like Amplifiers, Battery Chargers, and Networking interfaces.
Explains how VIGIL3 Audio Input and Output modules connect via an Ethernet loop and CAT5 patch leads.
Describes how VIGIL3 systems can be set up as centralized (single rack) or decentralized (networked) systems.
Details the conventions for numbering audio inputs and outputs based on module IDs in VIGIL3 systems.
Covers VIGIL3 support for native and legacy microphones, including configuration requirements.
Explains the system of 254 priorities for audio inputs and DVA messages, and how they affect output.
Describes how VA Active indication is managed based on priority, illuminating system indicators.
Details how fire panel inputs connect to VIGIL3 systems via interface modules for alerts and evacuations.
Explains the VIGIL3 Cause and Effect engine for controlling message playback and routing based on configurable rules.
Outlines VIGIL3's Power Over Ethernet (POE) mechanism and alternative power sources for system modules.
Discusses the VIGIL3 system's RTC subsystem for timed rules and fault log timestamping.
Explains fault self-description and elements shown in the VIGIL3 Configuration Live Faults Display.
Introduces VIGIL3 configuration tools, explaining data storage and upload via PC application.
Details configuration aspects for Audio Input Modules, including RS485 port and access profiles.
Covers configuration for Audio Output Modules, such as volumes and audio priorities per output.
General| Type | Voice Alarm System |
|---|---|
| Model | VIGIL3 |
| Manufacturer | Baldwin Boxall |
| Communication | RS485, Ethernet |
| Compliance | EN54-16, EN54-4 |
| Power Supply | 230V AC |
| Installation | Rack mountable |
| System Components | Amplifiers, Microphones |
| Redundancy | Yes |
| Control | PC Software |
| Audio Inputs | 4 line level |
| Zone Control | Individual zone |
| Message Storage | Internal memory for pre-recorded messages |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Weight | Varies depending on the specific unit/configuration. |
To Next Page