VIGIL3 Voice Alarm
Overview, Architecture and Configuration
VIGIL3 Overview, Architecture & Configuration issue 2 15
3 Fault Indication
Faults in a VIGIL3 system are global, each BV3AOM8 module
maintains both a fault log and a list of active faults. Assuming there
are no “islanded” modules (due to 2 x network cabling failures) all
fault logs / lists should be identical.
Regulatory fault indications are represented by BV3AOM8 LEDs.
Other more detailed fault information is available via VIGIL3
BVRDTSM microphones or via the V3 Configuration Software.
To Next Page
Loading...