Balluff BNI007Z - Setting the Serial Number 54 Hex; Configuration of the Extension Port 55 Hex

Balluff Network Interface / IO-Link BNI IOL-302-002-K006
www.balluff.com
16
4 Configuration: "Extension Off"
Setting the
serial number
54hex
The serial number has a default value of 16x00hex.
In order to use the "Identity" master validation mode, a serial number can be set using this
parameter.
This prevents a device from connecting to the wrong master port.
Configuration
of the
extension port
55hex
Configuration
Index 55hex value
BNI IOL-302-002-K006
0
BNI IOL-302-002-K006 with BNI IOL-302-002-K006
1
BNI IOL-302-002-K006 with BNI IOL-751-V08-K007
2
BNI IOL-302-002-K006 with BNI IOL-751-V10-K007
3
BNI IOL-302-002-K006 with BNI IOL-751-V13-K007
4
Note
The "Factory reset" command does not affect the configuration of the extension port in
any way.