1 Contents
1 User Instructions 4
1.1. Structure of the Manual 4
1.2. Typographical Conventions 4
Enumerations 4
Actions 4
Syntax 4
Cross-references 4
1.3. Symbols 4
1.4. Abbreviations 4
1.5. Divergent views 4
2 Safety 5
2.1. Intended Use 5
2.2. Installation and Startup 5
2.3. General Safety Instructions 5
2.4. Resistance to aggressive substances 5
Hazardous voltage 5
3 First Steps 6
3.1. Connection overview 6
3.2. Mechanical Connection 7
3.3. Electrical Connection 7
Function ground 7
IO-Link connection 7
Connecting the sensor hub 8
Module variants 8
Digital sensors 8
Extension port 8
Extension port 9
Extension port configuration 9
4 Configuration: "Extension Off" 10
4.1. IO-Link Data 10
4.2. Process Data/ Input Data 10
4.3. Process Data/ Output Data 10
4.4. Parameter Data/ Demand Data 11
Inversion of the inputs 40hex 12
Configuration of inputs /outputs 41hex 12
Safe state of outputs 42hex 13
Safe state of the outputs on Pin 4 42hex 13
Safe state of the outputs on Pin 2 43hex 14
Voltage monitoring 44hex 15
Monitoring the outputs 45hex 15
Actuator warning 46hex 15
Setting the serial number 54hex 16
Configuration of the extension port 55hex 16
5 Configuration: Extended with BNI IOL-302-002-K006 17
5.1. IO-Link Data 17
5.2. Process Data/ Input Data 17
5.3. Process Data/ Output Data 18
5.4. Parameter Data/ Demand Data 19
Inversion of the inputs 40hex 20
Configuration of inputs /outputs 41hex 21
Safe state of outputs 42hex 22
Safe state of the outputs on Pin 4 42hex 22
Safe state of the outputs on Pin 2 43hex 23
Voltage monitoring 44hex 24
Monitoring the outputs 45hex 24
To Next Page
Loading...
