Balluff BNI007Z - Extension Port; Extension Port Configuration

www.balluff.com
9
3 First Steps
Extension port
The BNI IOL-302-002-K006 module gives you the ability to use the No. 7 slot in various
ways. By default, it is used as a digital I/O slot, where both pin 2 and pin 4 can be used as a
digital input or output.
This slot can be used as an Extension port by making a corresponding entry in the
parameter with an index of 55hex. This makes it possible to operate one of the following
modules using the No. 7 slot.
BNI IOL-302-002-K006
BNI IOL-751-V08-K007
BNI IOL-751-V10-K007
BNI IOL-751-V13-K007
Extension port
configuration
Configuration
Index 55hex value
BNI IOL-302-002-K006
0
BNI IOL-302-002-K006 with BNI IOL-302-002-K006
1
BNI IOL-302-002-K006 with BNI IOL-751-V08-K007
2
BNI IOL-302-002-K006 with BNI IOL-751-V10-K007
3
BNI IOL-302-002-K006 with BNI IOL-751-V13-K007
4
Note
The "Factory reset" command does not affect the configuration of the extension
port in any way.