Balluff BVS HS-PB - Changing the Batteries

BVS HS-PB
Industrial Cordless Handheld Barcode Reader
www.balluff.com
4
Installing the Battery Pack
13
4.1.1 Changing the Batteries
1 Push the button at the bottom of the handle as shown to release
the battery.
2 Pull down to remove the battery.
Do not incinerate, disassemble, short termi-
nals or expose to high temperature. Risk of
fire, explosion. Use specified charger only.
Risk of explosion if the battery is replaced by
an incorrect type. Dispose of the batteries as
required by the relevant laws in force.
WARNING
Button
1
2