13
Operating Modes
28
BVS HS-PB
Industrial Cordless Handheld Barcode Reader
13.2 Motion Aiming Control
This feature configures the ability of the scanner to Enable/Disable the
Aiming system when motion is detected. Scan the Enter/Exit Program-
ming barcode above, then either of the barcodes below.
ENTER/EXIT PROGRAMMING MODE
Scan Mode =
Trigger Single
Scan Mode =
Trigger Pulse Multiple
Scan Mode =
Trigger Hold Multiple
Scan Mode = Flashing
Scan Mode = Always On
Scan Mode = Stand Mode
Motion Aiming Control =
Enable
Motion Aiming Control =
Disable
To Next Page
Loading...