BVS HS-PB
Industrial Cordless Handheld Barcode Reader
www.balluff.com
16
Error Codes
37
16 Error Codes
Upon startup, if the reader sounds a long tone, this means the reader
has not passed its automatic Selftest and has entered FRU (Field
Replaceable Unit) isolation mode. If the reader is reset, the sequence
will be repeated. Press and release the trigger to hear the FRU indica-
tion code.
The following table describes the LED flashes/beep codes associated
with an error found.
Number of LED
Flashes/Beeps
Error
Corrective
Action
1 Configuration
Contact
Helpdesk for
assistance
2Interface PCB
6Digital PCB
11 Imager
To Next Page
Loading...