7
Linking the Reader
18
BVS HS-PB
Industrial Cordless Handheld Barcode Reader
7.4 Variable PIN Code
Some Bluetooth drivers on the Host (such as WIDCOMM and Blue-
Soleil 8) require a Variable PIN Code. When attempting connection, the
application presents a window that includes a PIN Code which is to be
input using the BVS HS-PB reader. Please read the barcode "Variable
PIN Code" and restart the sequence from step 2 above.
When you hear the beep and see the Green LED blinking indicating the
reader is waiting for an alphanumeric entry, enter the required variable
PIN Code by scanning the corresponding barcodes in the “Hex-
Numeric Keypad” section at the back of this manual for alphanumeric
entry. Finish by scanning the
Exit HID Variable PIN Code
label.
Exit HID Variable PIN Code
To Next Page
Loading...