14
Technical Specifications
30
BVS HS-PB
Industrial Cordless Handheld Barcode Reader
14 Technical Specifications
The following tables contain Physical and Performance Characteristics,
User Environment and Regulatory information.
Item Description
PHYSICAL CHARACTERISTICS
Dimensions
Height: 212 mm
Length: 110 mm
Width: 74 mm
Weight 395 g
ELECTRICAL CHARACTERISTICS
Battery Type Li-Ion battery pack, 2150 mAh
Charge time for full
charge from full
discharge
4 hours with external power supply adapter
a
a. Charge Times are much lower when battery is within daily typical operating
condition.
Typical 10 hours with Host power (in this case
no supply adapter is needed)
a
Operating auton-
omy (continuous
reading)
30,000 reads (typical)
Operating voltage
cradle
External Power Supply:
USB:
10-30 Volt DC
5 Volt DC ±10%
Operating current
(cradle)
Charging:
800 mA @10 V DC (Ext. Power)
500 mA @ 5 V DC (USB)
Operation: 150 mA @10 V DC
PERFORMANCE CHARACTERISTICS
Light Source
Aiming:
Illumination:
Laser, Class 2, Red
LED, white
Roll (Tilt) Tolerance ± 180°
Pitch Tolerance ± 40°
Skew (Yaw) Toler-
ance
± 40°
Print Contrast Mini-
mum
15% minimum reflectance
Reading Indications
Beeper, 2x LED green;
green light projection on the code
To Next Page
Loading...