18
1
: -1111 is the standard delivery variant and for this reason it is not mentioned.
1.7.2 What's inside and accessories
Due to the varying fields of application the mvBlueFOX is shipped without accessories. The package contents:
• mvBlueFOX
• instruction leaflet
For the first use of the mvBlueFOX we recommend the following accessories to get the camera up and running:
• A USB 2.0 cable
Attention
"Reduced image quality"
According to the customer and if the mvBlueFOX-MLC is shipped without lensholder, the mvBlueFOX-
MLC will be shipped with a protective foil on the sensor which will affect the image quality.
→ Before usage, please remove this foil!
Accessories for the mvBlueFOX:
Part code Description
ADAPTER CS-MOUNT Lens fixing for mvBlueFOX to match with CS-mount lenses
KS-USB2-AA-EXT 05.0 USB 2.0 extension, activeUSB2 A plug to USB2 A jack, length 5m
KS-USB2-AB 03.0 TR USB 2.0 cable A-B, transparent, Profi Line. Length 3m
KS-USB2-B4ST 02.0 USB 2.0 cable for mvBlueFOX, Binder 4pol to USB2-A. Length: 2m
KS-USB2-B4ST 03.0 USB 2.0 cable for mvBlueFOX, Binder 4pol to USB2-A. Length: 3m
KS-USB2-B4ST 05.0 USB 2.0 cable for mvBlueFOX, Binder 4pol to USB2-A. Length: 5m
KS-USB2-PHR4 01.5 USB connector cable for mvBlueFOX-M1xx. Length: 1.5m
KS-PHR12 500 Cable for mvBlueFOX-M1xx dig. I/O, 12-pin. Length: 500mm
1..4 brown
5..8 gray
9 red
10 black
11 yellow
12 black
KS-MLC-IO-TTL 00.5 mvBlueFOX-MLC board-to-board TTL IO cable for master-slave synchroniza-
tion (Molex plug to Molex plug), Length: 0.5m
KS-MLC-IO-W mvBlueFOX-MLC board-to-wire I/O data cable, Molex 0510211200 with crimp
terminal 50058. Length: up to 1m
KS-MLC-USB2-IO-W mvBlueFOX-MLC board-to-wire I/O data and USB 2.0 cable, Molex
0510211200 with crimp terminal 50058 to USB2-A. Length: up to 1m
MV-Lensholder BFM-C C-mount lensholder for mvBlueFOX-M,incl. IR-Cut filter
MV-Lensholder BFM-S 9031 S-mount lensholder M12 x 0,5 type MS-9031 for mvBlueFOX-M102
MV-Lensholder BFM-S 9033 S-mount lensholder M12 x 0,5 type: MS-9033 for mvBlueFOX-M102
MV-LENSHOLDER SH02M13 S-mount lensholder M12 x 0.5, height 13mm for mvBlueFOX-MLC
MV-LENSHOLDER SH01F08 S-mount lensholder M12 x 0.5, height 8mm for mvBlueFOX-MLC
ADAPTER S-C AD01S Adapter for S-mount lens (M12x0,5) to C-mount, high penetration depth for
mvBlueFOX-IGC
ADAPTER S-C AD02F Adapter for S-mount lens (M12x0,5) to CS-mount, penetration depth: 5.5mm,
outside diameters: 31mm for mvBlueFOX-IGC
MV-Tripod Adapter BF Tripod adapter for mvBlueFOX
MATRIX VISION GmbH
To Next Page
Loading...
Need help?
General
