Bambu Lab A1 mini - Specification

Specication
Fused Deposition ModelingPrinting Technology
Body
Toolhead
Heatbed
Build Volume (W×D×H)
Chassis
Hot End
Extruder Gears
Nozzle
Steel
Stainless Steel
Max Hot End Temperature 300 ℃
Nozzle Diameter (Included) 0.4 mm
Nozzle Diameter (Optional) 0.2 mm, 0.6 mm, 0.8 mm
Filament Cutter
Filament Diameter
Yes
All-Metal
Steel + Extruded Aluminum
180*180*180 mm³
1.75 mm
Compatible Build Plate
Max Build Plate Temperature
Max Speed of Tool Head
Max Acceleration of Tool Head
Max Hot End Flow
Pa Cooling Fan Closed Loop Control
Closed Loop Control
Closed Loop Control
Ideal
Not Recommended
Low Rate Camera (up to1080P)
Timelapse Suppoed
Yes
Yes
Yes
Yes
347*315*365 mm³
5.5 kg
Hot End Fan
MC Board Cooling Fan
PLA, PETG, TPU, PVA
Monitoring Camera
Filament Run Out Sensor
Filament Odomet
Power Loss Recover
Filament Tangle Sensor
Dimensions (W×D×H)
Net Weight
ABS, ASA, PC, PA, PET,
Carbon/Glass Fiber Reinforced Polymer
80 ℃
500 mm/s
10 m/s²
28 mm³/s @ABS (Model: 150*150 mm single wall;
Material: Bambu ABS; Temperature: 280 ℃)
Bambu Textured PEI Plate
Bambu Smooth PEI Plate
Speed
Cooling
Suppoed Filament
Sensors
Physical Dimensions
Item Specication