BANDELIN SONOPLUS mini20 - Pulsation [Pulse]

AM 50% ProgNo 5*
time 01:30 00:00
pulse 00.5s 01.0s
energy 0.000 kJ
AM 50% ProgNo 5*
time 01:30 00:00
pulse 00.5s 01.0s
energy 0.000 kJ
pulse 00.5s 01.0s pulse off
AM 50% ProgNo 5*
time 01:30 00:00
pulse 00.5s 01.0s
energy 0.000 kJ
pulse by hand key
AM 50% ProgNo 5*
time 01:30 00:00
pulse 00.5s 01.0s
energy 0.000 kJ
AM 50% ProgNo 5*
time 01:30 00:00
pulse 00.5s 01.0s
energy 0.000 kJ
pulse 00.5s 01.0s
00
MENU
Pulse switch-on time
1 to 60 seconds
MENU
AM 50% ProgNo 5*
time 01:30 00:00
pulse 00.5s 01.0s
energy 0.000 kJ
AM 50% ProgNo 5*
time 01:30 00:00
pulse 00.5s 01.0s
energy 0.000 kJ
00.5
MENU
Pulse switch-on time
0.1 to 60 seconds
MENU
01
AM 50% ProgNo 5*
time 01:30 00:00
pulse 00.5s 01.0s
energy 0.000 kJ
01.0
Pulse switch-off time
1 to 60 seconds
Pulse switch-off time
0.2 to 60 seconds
START
STOP
17 / 3851406c GB/2019-07
1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com
3.2.2 Pulsation [pulse]
/1
In addition to the pulse turn-on time t
E
and the pulse turn-off time t
A
, 2 additional operating modes
can also be set:
off no pulsation or continuous sound
by hand key it is possible to pulse manually with the button on the ultrasonic transducer.
Ultrasound operation will be active as long as the button on the ultrasonic
transducer is pressed.
a) Setting the operating modes
b) Setting the time intervals
The maximum setting value is 600.0 s. The minimum setting value will depend on the type of
device and ranges between 0.1 und 0.3 s.
Turn-on time t
E
/1 The pulse period is the sum of the turn-on and turn-off times t = t
E
+ t
A