Bandit Industries, Inc.
Safety Booklet ix
DANGER
!
SAFETY CLOTHING AND APPAREL
SAFETY CLOTHING AND APPAREL
It is essential that a chipper operator wears proper gloves, clothing, hard hat, face shield, hearing protection,
safety glasses, etc. when operating a chipper. Don’t wear gauntlet type gloves or loose improper clothing.
Avoid wearing necklaces, rings, watches, and neckties while operating the equipment.
Follow the established “ANSI” and “OSHA” standards.
DANGER
!
REFLECTIVE STRIPED TAPE ON
FEED CONTROL HANDLE
We began installing striped reective tape on the feed control handle of our hand fed chippers. This tape
is reective, self adhesive, and has contrasting colors. The tape helps make the feed control bar stand out
more and it makes the rear of the chipper more visible to a vehicle behind you while transporting the chipper.
Striped tape can be obtained through your local Bandit® dealer. The striped tape can be ordered by the foot
under part number 900-9901-69.
REFLECTIVE STRIPED TAPE ON
FEED CONTROL HANDLE
STRIPED
REFLECTIVE
TAPE
CONTROL
BAR
To Next Page
Loading...
