Before starting the machine, take a minute to
check a few things. The machine should be in an
area restricted from people passing by. This area
around the machine must be free of all objects that
can obstruct your movement when working with the
machine. The machine should be checked for loose
tools or foreign objects. All tools not in use should
be secured in a tool box.
activate the devices.
in moving machinery parts. Keep such items as long
hair, shirt sleeves, and shirt tails properly contained.
Avoid wearing necklaces, rings, watches, and
especially neckties while operating this machinery.
This machine is equipped with safety decals,
guards and designs for your protection.
There must be at least two qualified and
trained operators at the work site. They must be
positioned in safe working locations, following safety
procedures and instructions, and aware of each
others whereabouts. There must, also, be at least
two people on site during maintenance and service
procedures in case an accident should occur.
This equipment is intended for use by adults
who have been properly trained and are physically
capable of operating the machine safely. Never
allow minors to operate this machine. Never operate
any machine while under the in uence of drugs or
alcohol. Never operate equipment that is in need of
repair or adjustment. Keep children, bystanders and
animals clear of working area.
Accidents are typically caused by making
mistakes. The operator does not read the manual,
overlooks warning decals, or fails to use lockouts
provided for their safety. This occurs after the
operator has become familiar with the machine.
The operator is very cautious in the initial start up
and operation because they do not understand the
machine.
Before operating the machine, you must have all
potential operators read and follow manuals and
decals, watch the video and follow the guidelines.
Read and follow all the instructions in this
manual thoroughly. Your safety is dependent on
your knowledge of how to operate and maintain this
machine. You may obtain additional copies of this
manual from your Bandit Dealer.
Always be cautious and careful when operating
your equipment.
Wear all personal protection equipment (PPE)
and follow all safety standards per ANSI and OSHA
instructions. Examples of equipment: hard hat,
face shield, safety glasses, gloves, ear protection,
high visibility vest, and steel toe boots. Do not wear
gauntlet or secured t gloves. Always keep a fully
charged re extinguisher with the machine while
operating or servicing the machine. Failure to do
this will cause severe injury or death.
To Next Page
Loading...
