p. 16 - Tamper output
BANDIT 240 SCBANDIT 240 SC
d) Moved:
This red LED lights when any movement
of the fog generator has been detected.
The fog generator is equipped with a
multi-axis solid state gyro sensor.
This sensor registers any movement or
twisting of the fog generator and sends
notification of this abnormality to its
controller.
The motion sensitivity is adjustable via
2 DIP switches [Move] (see p. 25).
Normally this Tamper contact is also included in the general
sabotage loop of the controlling alarm system.
x
1 2 31 2 3
Front
Move
X Y
1 2 3
As long as there is no Tamper error
COM and NO are closed.
BANDIT Controller CF31 v2 / Manual v.102
To Next Page
Loading...