Attention
If you want to dispose of this product, you will be disposed of as industrial waste
Please dispose of in accordance with waste disposal regulations specied.
Please be sure to use the specied parts and accessories
The malfunction or accident, the cause of the re.
Please do not take any action in the hot-line state
If you want to support the installation, maintenance, and failure, after conrming that the main circuit breaker
(power board) is always out, please work. When working with hot-state, there is a potential for electric shock.
Please use the power supply as set forth in the specication always
If it is used in power outside of the specications such as a power in excess of the
rated voltage, there is a risk of overheating, re or malfunction.
Keep the specied temperature range
Use the product so that its temperature does not exceed the specied temperature range.
Using outside the specication range may cause equipment failure due to heat generation.
To contact a specialized dealer or installation of equipment (installation), the wiring
Improper by doing installation work on your own, you will malfunction or an electrical
shock, the cause of the re.
Do not put your hands or metal objects between the coils during operation
There and heat generated by induction heating, the potential to catch re.
Do not install in a place that may be exposed to high temperature
When installed in a place such as hot air heater or direct sunlight directly, it could
cause a malfunction or re.
Do not block the cooling fan
Heat build up inside and cause malfunction or re.
Do not touch the high temperature part
Work for a while or immediately after operation, please do not touch the (power sup
-
ply unit, charging unit, head part) hot spots. Doing so could result in burns.
Do not use a deteriorated battery
Charging a deteriorated battery may cause the battery to overheat, resulting in an accident or fire.
Replace the battery regularly according to the battery manufacturer’s recommended replacement time.
Do not use head cables other than those specied by us.
If you use a cable other than the specied one, the cable may generate heat, resulting in an
accident, malfunction, or re. Be sure to use the specied cable.
Do not disconnect the battery while charging
If the battery is disconnected during charging, it may cause an accident, malfunction or re.
Be sure to check that the battery is not charged before disconnecting the battery.
Please be careful about the inuence due to the installation environment
Please be careful about the inuence on the material degradation due to the installation environment and the intru-
sion of foreign material.Especially when using it outdoors, please install it with less inuence from ultraviolet rays.
To Next Page
Loading...