© Banner Engineering Corp. www.bannerengineering.com 28
PROFINET
®
7. Click Properties.
8. Click General.
9. Select PROFINET Interface > Ethernet addresses.
Figure 6: Ethernet addresses
10. Select Set IP address in the project.
11. Enter the IP address.
12. Right-click on the device icon and select Online & diagnostics.
Figure 7: Online & diagnostics menu and screen
STEP RESULT: The Online & diagnostics windows displays.
13. Select Assign IP address under Functions.
14. Click Accessible devices.
S
TEP RESULT: The Select device window searches the network for available devices.
15. Determine the device to be adjusted via the MAC address and select it.
To Next Page
Loading...