27 © Banner Engineering Corp. www.bannerengineering.com
PROFINET
®
9. Select the DXM GSD file.
10. Click Install.
Figure 4: Hardware catalog
STEP RESULT: The system installs the DXM GSD file and places it in the Hardware catalog. In the example, the DXM GSD file is
located under Other field devices > PROFINET IO > Banner Engineering Corp. > Banner.
A
FTER COMPLETING THIS TASK:
If the DXM GSD file does not install properly, save the log and contact Banner Engineering Corp.
6.5.2. Change the Device IP Address
Follow these instructions to change the IP address of the DXM device using the Siemens TIA Portal (v14) software. Use these instructions as a
basis if you are using another controller (PLC).
1. Launch the Siemens TIA Portal (v14) software.
2. Click Open existing project.
3. Select a project and open it.
4. Click Devices & networks.
Figure 5: Network view
STEP RESULT: The Network view displays.
5. Double-click on the DXM icon to open the Device view screen.
6. Click on the DXM icon in the graphic area of the Device view screen.
S
TEP RESULT: The Module properties window displays and the module can now be configured.
To Next Page
Loading...