Original Instructions
December 19, 2023
p/n: 237795 Rev. A
TL50 Basic Wireless Andon Tower Light
Instruction Manual
•
•
•
•
•
•
•
Features
Multi-Color and Audible Andon Indicators
Rugged,cost-effective,andeasy-to-installAndonindicators
IlluminatedtowerlightsegmentsandAndonboxindicatorsprovideeasy-to-seestatus
Four available colors: blue, green, yellow, and red
Integral four capacitive touch button controller with status LEDs
Steady or flashing status capability
300 mm pre-assembled stand-off pipe length
TwowirelessISMradiooptions:900MHzand2.4GHz
Models
Model LCA130T Controller Radio Frequency Tower Light Description
LCA130T4DXN2-TL50BGYR300Q 2.4 GHz TL50 Basic Andon Tower Light (Blue, Green, Yellow, Red)
LCA130T4DXN9-TL50BGYR300Q 900 MHz TL50 Basic Andon Tower Light (Blue, Green, Yellow, Red)
TL50-LCA130T Switch Diagrams
The control box status LED mimics the tower light status in color and animation.
Tap one of the buttons to turn the corresponding status LED on or off. Hold the button to activate the flashing function.
LED Key:
1=Blue
2=Green
3=Yellow
4=Red
InputPinout-AllModels
4-Pin M12 Male Connector Pin Wire Color Wiring Description
1 Brown (bn) 18VDCto30VDC
2 White (wh) Use to configure with the Pro Editor Configuration software
3 Blue (bu) DC common (GND)
4 Black (bk) Not Used
Configuration Instructions
LCA130T DIP Switches
Before applying power to the device, set the radio's DIP switches.
© Banner Engineering Corp.