The following instructions assume that you've already established a link using the BaoFeng
software from a computer running Windows, and that the BaoFeng software is already installed
and running.
Procedure 9.3. Setting the power-on-message
1. Click other in the menu bar; a dialogue box titled "Other" should have popped up.
2. In the box titled "Power On Message", there are two text fields representing the two lines
on your LCD. Enter the desired text in the fields.
3. Click Write to write your changes to the radio.
Even though the software has eight (8) character wide text fields for the power-on
message, be aware that the display on the BF-F8HP can only display a maximum of
seven (7) characters.
Make sure that menu item 38 is set to MSG, otherwise your message wont be displayed.
See Chapter 4 Working the menu system for details on how to navigate the menu.
Some times it takes the BaoFeng software more than one try to connect to your radio. If
you see a dialogue box popping up stating that you have a connection failure, close the
dialogue box and click read or write again.
To Next Page
Loading...