Ex. Programming a Simplex Channel with CTCSS tone
EXAMPLE New memory in Channel 99:
RX = 446.000 MHz
TX CTCSS tone 123.0
1. Change from Menu to Menu by pressing the [EXIT/AB] button.
2. Set radio to VFO Mode by pressing [V/M]
Channel number at the right will disappear.
3. Menu 28 [M] 9 9 [M] [EXIT] Delete Prior Data in channel (Ex. 99)
4. Menu 13 [M] 123.0 [M] [EXIT] Select desired TX encode tone (Ex 123
CTCSS)
Ø Use [A/B] to select Upper display -> Enter RX frequency (Ex. 446000)
5. Menu 25 [M] 9 9 [M] Enter the desired channel (Ex 99)
Ø [EXIT] Channel has been added
6. [V/M] Return to MR Mode. Channel number will re-appear.
To Next Page
Loading...