4. Use the and keys to pick the desired color.
5. Press to confirm and save.
6. Press to exit the menu.
To change the time the backlight stays on for your LCD, follow these steps:
Procedure 9.2. Setting backlight time-out
1. Press the key to enter the menu.
2. Enter on your numeric keypad to come to backlight time out.
3. Press key to select.
4. Use the and keys to pick the desired color.
5. Press to confirm and save.
6. Press to exit the menu.
For details see the section called “29 WT-LED - Display backlight color, Standby” and onward in
Appendix B, Menu definitions.
Power-on message
The power-on message can only be set via computer link, see the section called “Computer
programming” for details on how to set up a link with your computer.
To Next Page
Loading...