BaoFeng Tech BF-F8HP - Appendix B. Menu Definitions; SQL - Squelch Level; STEP - Frequency Step; TXP - Transmit Power

64
VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
!
BF-F8HP!
!
!
!
Appendix B. - Menu definitions
See Chapter 4, Working the menu system for more info about using the menu-system.
Menu
Name
(Full Name)
Settings
Description
0
SQL - Squelch
Level
[0 - 9]
Setting the squelch to 0 will open
up the squelch entirely.
- Squelch silences the receiver when there
is no signal.
- Sensitivity can be varied from .1 to .3 mV
on UHF
Sensitivity can be varied from .1 to .2 mV
on VHF
1
STEP - Frequency
Step
2.5K[0] | 5.0K[1] | 6.25K[2] |
10.0K[3] | 12.5K[4] | 20.0K[5] |
25.0K[6] | 50.0K[7]
Selects the amount of frequency change in
VFO/Frequency mode when scanning or
pressing the or keys.
2
TXP - Transmit
Power
HIGH [0] | MID [1] | LOW [2]
Selects between HIGH, MID, and LOW
transmitter power when in
VFO/Frequency mode. Use the minimum
transmitter power necessary to carry out
the desired communications.