2.1.4 Parking brake control device
The parking brake lever is of a cam type. The brake force can be adjusted with the
adjuster on the end of the brake lever. Brake force adjustment:
When you turn the adjuster clockwise, the force increases, otherwise, when you turn
the adjuster counterclockwise, the force decreases. See Fig. 2-10. Pull force: 15 to 30 kg.
▲Pull force adjustment of control lever (Fig. 2-10)
(1) Position of releasing the brake.
(2) Pull the lever (point B) with 15-30Kg force, it can be pulled to diagrammatic
position. When the force is great, the point A turns to right, on the contrary turns to left.
Fig 2-10 Parking brake
▲Adjustment of switch (Fig.2-11)
(1) Loose two mounted bolts.
(2) Pull the parking brake lever.
(3) Mount the roller on the bracket of control
lever, after hearing the sound of motion, press
for 1mm and tighten it.
(4) Release the parking brake and pull the
control lever again, make sure the switch is
“ON”.
Fig.2-11 Parking brake lever
To Next Page
Loading...
