16 Coronis 5MP
USING THE DUAL TILT & SWIVEL FOOT
1 Unpack the dual tilt & swivel foot and place it on a solid surface.
2 Unpack the first display
Figure 9: Mounting a display
3 Hold the display slightly angled with the logo downwards and
position the top of the mounting anchor, at the back of the display,
perfectly aligned on the top of the mounting clamp of the foot.
4 Push the downside of the display gently backwards until the
mounting clamp locks into the mounting anchor.
5 Verify that mounting clamp and mounting anchor are perfectly
fitting and that the display is firmly mounted.
6 Repeat steps 2 to 5 for the second display.
7 Pull out the foot lock clip.
Limit transportation distances of the mounted displays and foot
system.
To Next Page
Loading...
