Coronis 5MP 65
Display is used exceeds the applicable RF compliance level above, the BARCO CORONIS
Display should be observed to verify normal operation. If abnormal performance is
observed, additional measures may be necessary, such as re-orienting or relocating the
B
ARCO CORONIS Display.
b
Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m.
At 80 MHz and 800 MHz, the higher frequency range applies.
These guidelines may not apply in all situations.
Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
To Next Page
Loading...
