66 Coronis 5MP
RECOMMENDED SEPARATION DISTANCE
The BARCO CORONIS Display is intended for use in an electromagnetic
environment in which radiated RF disturbances are controlled. The
customer of the user of the B
ARCO CORONIS Display can help prevent
electromagnetic interference by maintaining a minimum distance
between portable and mobile RF communications equipment
(transmitters) and the B
ARCO CORONIS Display as recommended below,
according to the maximum output power of the communications
equipment.
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in meters (m) can be estimated using the equation applicable to the
frequency of the transmitter. Where P is the maximum output power rating of the
transmitter in watts (W) according to the transmitter manufacturer.
Rated
maximum
output power
of transmitter
W
Separation distance according to frequency of transmitter
150kHz to 80MHz
80MHz to 800MHz 800MHz to 2.5GHz
0.01 0.12 0.12 0.23
0.1 0.38 0.38 0.73
11.2 1.2 2.3
10 3.8 3.8 7.3
100 12 12 23
At 80MHz and 8000MHz, the separation distance for the higher
frequency range applies.
These guidelines may not apply in all situations.
Electromagnetic propagation is affected by absorption and
reflection form structures, object and people.
To Next Page
Loading...
