6. Source menu
When entering the m enu for each input connec tor, you can change the following:
• Color Space
• Signal Range
•EDID
How to configure a connector
1. Press Menu to ac tivate the menus and s elect Source.
Image 6-2
Select So u rce
2. Press OK.
The Select Source m enu is displayed with the actual available sources filled out.
3. Scroll down to the bottom of the list of available sources and select Connector Settings.
Image 6-3
Source menu, Connector Settings
The available input connectors are displayed.
Image 6-4
Select so urce
4. Select the desired connector.
The Con ne ctor S e ttings menu for this connector will be displayed.
50
601–426 F70 SERIES 24/10/2017
To Next Page
Loading...
