6. Source menu
6. SOURCE MENU
About the Source me nu
This menu is used to select, review and configure sour ces into the projector. Enables either via the s ource menu, or the sho rtcut k ey.
By navigate t hrough the Home/Source m enu, it will be visible also on the OSD .
By using the shortcut k ey, the menu occ urs only on the LCD disp lay.
Overview
• Connector selection
• Connector Settings
• Using Dual inputs
6.1 Connector selection
About
Home/Source
Image 6-1
Source Menu. (Scroll for more choices).
Click on the relevant input connector icon to swap or activate the sou rce.
The icon fo r the active source is highlighted.
The list of displayed s ources can be adjusted to include other connectors.
The default selection of connectors displayed is:
• Display Port 1
• Display Port 2
• Dual Displayport Columns
• Dual Displayport Sequential
•DVI1
•DVI2
• Dual D VI Columns
• Dual D VI Sequential
• HDBaseT
• HDMI
•SDI
6.2 Connector Settings
About Connector Settings
The Connec tor Settings menu allows you to change settings for each input connector of the projector.
By default all options for every connector are set to au tomatic, together with the native Extended Display Identification Data (EDID).
601–426 F70 SERIES 24/10/2017 49
To Next Page
Loading...
