8. Installation menu
Image 8-33
4. Click on the on/off button on top to activate the selected warp file.
Image 8-34
8.5 Blending
8.5.1 Basic Blend
About
When two projectors are used together to make one picture on the screen, the blend function must be activated. T his blend function
ensures a seamless transition of the i
mages between the two projectors.
The principle is that the light intensity in the blend zone from each projector w ill be adjusted individually, so that the rendering on the
screen are perceived as from one projector.
The b lend function can be enabled for both pictures ov er/under, and pictures side by side.
The blend will not be affected by the projector ’s warp.
601–426 F70 SERIES 24/10/2017
75
To Next Page
Loading...
