8. Installation menu
Image 8-2
Image 8-3
Select the Laser slider, and mov e the slider to the left by the arrow keys to nearly 0% to reduce the laser intensity. (Daylight visibility).
By this, the IR LED will be dominant, and the image on the screen will be visible with the Night Vision Goggles. P ut on the goggles,
and adjust the IRLED slider to obtain an optimal night vision rendering.
Image 8-4
By mix ing the intensity (power) of both the laser and the IR LED, it is also possible to simulate o ther visibility scenarios, such as
evening / early night vision.
64
601–426 F70 SERIES 24/10/2017
To Next Page
Loading...
