Display Controller 19
4 If you are using QAWebAgent version 1.10.2 or older, then a
separate software component is required for supporting DDC
communication through the dual link dongle. Run setup.exe from
Barco_DLDP2DVI_Install package after driver installation to install
the SW.
DPDVI DL Dongle Installation
Use cases
Use Single Link Dongle with these displays:
• Gray scale displays with resolution up to 2048x2560
• Color displays with resolution up to 1920x1200
Use Dual Link Dongle with these displays:
• Color 3MP displays, and 6MP Fusion displays
• Gray scale 5.8MP displays
To Next Page
Loading...
