Display Controller 21
Driver and Software Installation
This chapter will guide you through the installation of the drivers,
software and documentation associated with your Barco Display System
or Barco Display(s).
The process for the Barco MXRT family of controllers and B
ARCOMED
family of controllers is handled separately.
If you install Barco displays without Barco display controllers, no drivers
will be installed. Only the documentation will be installed on your
system.
Driver and software installation
prerequisites
Your operating system must be installed and running before you can
install the driver, software and documentation for the display
controller(s) for your Barco Display System.
Before you begin make sure that all of your Barco Display(s) are
connected to the appropriate display controller(s) in your system.
To install or remove the drivers, software, or documentation
you must be logged on as a user with administrator privileges.
This installation procedure is based on operating Windows in
“Classic” view style. If “Home” or “Default” view style is
selected in Windows, sections of this procedure may be
different than what is listed
To Next Page
Loading...