22 Display Controller
Installing the BARCO MXRT drivers and
software
This process applies to the following versions of Windows:
• Windows XP Professional
• Windows XP Professional x64 Edition
• Windows Server 2003
• Windows Server 2003 x64 Edition
You will need to install the Barco Display System drivers and software in
the following cases:
• After you have installed the display controller(s) for your Barco
Display System in your system for the first time.
• After you have reinstalled or upgraded your operating system.
• After you have moved the display controller(s) to a different PCI/
PCIe slot.
• When you upgrade to a newer version of the MXRT driver.
• When you put additional MXRT display controllers in your system.
The following will guide you through the installation procedure:
1 You do not need to manually uninstall an existing driver before
updating to the current version. The Barco Product Installation
Wizard will detect any prior installations and start the
uninstallation process automatically.
Start your system. When the Found New Hardware Wizard comes
up, click Cancel. When the System Settings Change window asks
you to restart your computer, click No or Restart Later.
2 Run the Barco Product Installation Wizard.
The Barco Product Installation Wizard should start automatically
when you insert the Barco Display System Installation CD-ROM into
your computer’s CD/DVD drive after the operating system has
The installation dialog will display in English if your operating
system’s language is not supported.
To Next Page
Loading...
