40 Display Controller
Barco system report
The Barco System Report, also known as BarcoMed SelfExam, is a wizard
based tool which collects data about the components that are installed
in your system. This information is used by the Barco MIS Support team
when trying to resolve customer issues.
MediCal QAWeb
Clicking on the QA Web button will launch the MediCal QAWeb
application. Please refer to the MediCal QAWeb manual for information
about this application.
Advanced properties for MXRT controller
To access the advanced properties configuration pages for the display
controller(s) for your Barco Coronis Display System, click on the
Advanced button in the Graphics Device Information section.
There are several pages accessible from the advanced configuration
button. They are:
• Barco Adapter Configuration
• OpenGL & Direct 3D
• Rotation (when supported)
• (Device) Details
• Application Profiles
Barco Adapter Configuration
The Barco Adapter Configuration page allows you to switch between the
following monitor configurations and display options for the displays
connected to a Barco MXRT controller:
DISPLAY LAYOUT:
• DualView
Both displays are enabled independent of each other.
To Next Page
Loading...
