38 Display Controller
Barco Driver Properties
Accessing the Barco tab
You must have logged on to Windows using an account with
administrator privileges in order to use the Barco portions of the
Windows Display Control Panel to change any display settings.
1 Open the Windows Display Control Panel by one of the methods
below:
a Start > Control Panel > Display
or
a Open the “Display Properties Control Panel” by right clicking
in an empty area on the desktop, then select Properties.
2 Click on the Settings tab.
3 Select the rectangle that represents the B
ARCO DISPLAY CONTROLLER
whose settings you wish to change.
4 Click on the Advanced Settings button.
5 Select the Barco tab from the Properties screen.
Using the Barco tab
The Barco tab is divided into three sections. The first section provides
information about the graphics controller and allows access to the
graphics controller advanced configuration pages. The second section
provides information about the display. The bottom section allows access
To Next Page
Loading...
