Display Controller 37
Control Panel Settings
This chapter describes how to configure the displays in your BARCO
Display System using the tools available through the Advanced button
on the Settings tab of the Windows Display Control Panel.
If you purchased Barco Medical Displays only and not a complete Barco
Coronis Display System you will need to refer to the user manual for the
display controller you are using.
Languages supported
The BarcoMed tabs support the following languages:
• English (U.S) (default)
• Dutch
• French
• German
• Italian
• Japanese
• Korean
• Simplified Chinese
• Traditional Chinese
• Spanish
To change between the languages select the correct region via the
Regional Settings Control Panel in your machine’s Start > Settings >
Control Panel.
To Next Page
Loading...
