Barco G60 - Product Safety Labels

R5910887 /00 G60 13
1.6 Remote Control Unit (RCU)
Button identification
Button location No. Button Function
ON OFF
21 3
54 6
87 9
Gamma Bright Cont. PIP
0
Info
Mode
Auto Input
Menu Exit
Hot Key
Shutter
(AV Mute)
Pattern
Focus Lens H
Lens V
Keystone H
Keystone V
Zoom
Enter
1
4
3
6
10
12
14
2
8
9
16
17
19
20
22
23
5
7
11
13
15
18
21
24
1 ON Turn on the projector.
2 OFF Turn off the projector.
3 Number Input numbers (0-9).
4 Info Displays information on the source
image.
5 Mode Select a preset picture mode.
6 Auto Automatically synchronize the projector
to an input source.
7 Input Select an input source manually.
8 Enter Confirm an selection.
9 Arrow keys Use arrow keys to navigate through the
menu or select the appropriate settings.
10 Menu Show the main menu on the screen.
11 Exit Back to previous Menu.
12 Gamma Set the gamma of the image.
13 PIP Set up the picture in picture (PIP) mode.
14 Brightness Set the brightness of the image.
15 Contrast Set the contrast of the image.
16 Lens H Adjust the image position horizontally.
17 Lens V Adjust the image position vertically.
18 Focus Adjust the image focus.
19 Keystone H Adjust a horizontally keystone image.
20 Keystone V Adjust a vertically keystone image.
21 Zoom Adjust the image size.
22 Shutter Momentarily turn off/on the screen (AV
Mute).
23 Hot Key Select a specific function set as the hot
key.
24 Pattern Display test patterns.
1.7 Lenses
The table below is subject to changes and was last updated on 2019-01-03. Consult Barco's web
site for the most recent information about available lenses.
Introduction